Intel SR6850HW4 - Server Platform - 0 MB RAM, Руководство по эксплуатации продукта

Страница: 223 / 272

223
Technical Reference
Creating DOS-bootable USB Flash Memory Device
This section provides instructions for creating a DOS-bootable USB flash memory device using the
Intel® Server Platform SR6850HW4. This process depends on the BIOS and EFI correctly
detecting both a USB floppy disk drive and the USB flash memory device.
CAUTION
This process formats the media and deletes all content from the media. This
process also requires you to detach hard disk drives from the server before
beginning. Before beginning, backup data on all devices attached to the
server and test the backup.
NOTE
Devices from some manufacturers may not be compatible with this system.
For a link to a list of tested hardware, see the
Intel
®
Server Platform
SR6850HW4 Tested Hardware and Operating System List .
Before Beginning
To create a DOS-bootable USB flash memory device on the Intel® Server Platform SR6850HW4,
you need the following:
ƒ
Intel® Server Platform SR6850HW4
ƒ
USB floppy disk drive
ƒ
USB flash memory device
ƒ
Bootable DOS floppy disk that contains the files FDISK.EXE and FORMAT.COM
Verify the following:
ƒ
Attach the USB flash memory device to a different computer to ensure it can be detected
ƒ
Attach the USB floppy disk drive to a different computer to ensure it can be detected
ƒ
Make sure the floppy disk drive can boot to the bootable floppy disk that contains the
FDISK.EXE and FORMAT.COM files
ƒ
Make sure the FDISK.EXE and FORMAT.COM files will successfully partition and format a
hard disk drive.
CAUTION
This process formats the hard disk drive and deletes all content from the
drive.