Intel SR6850HW4 - Server Platform - 0 MB RAM, Руководство по эксплуатации продукта

Страница: 113 / 272

113
FRUSDR Load Utility Command-line Options
FRUSDR Load Utility command-line arguments can specified in any order. The first command
identified is operated on, followed by the next command, and so on. This is known as “Command
Line Precedence.”
If an argument is not specified and that argument has a default value, the default value is used. The
FRUSDR Load Utility command-line format is:
frusdr [/?] [/h] [/p] [/d {smb, fru, sdr}] [/Cfg filename.cfg]
Where:
ƒ
/? or /h : Displays usage information.
ƒ
/d {smb,fru,sdr} : Displays FRU information from a device at the specified address.
ƒ
/Cfg filename.cfg : Uses the custom CFG file named by filename.cfg. The configuration file
may be used to load multiple FRU and SDR files. In the configuration file, each FRU and SDR
file name must be called out. In addition, each FRU area and field to be programmed must also
be specified. The configuration file may be used to prompt the user for information, such as the
FRU areas to program.
ƒ
/p : Pause between blocks of data. /P may be used with all other commands. It causes the data
being displayed on the screen to pause after a pre-determined amount is written, so that the
displayed data does not scroll off the screen. If there is not enough data being displayed to
warrant a pause, then the pause command is ignored. The pause command affects only the
execution path for the /?, /h, and /d commands.
Commands can be divided into two categories: Flag Commands and Action Commands. Pause (/P)
is the only Flag Command. This flag is used by the Action Commands (/?, /h, /d, and /cfg).
No error is displayed if an Action Command does not use the Pause Flag Command. However, if
more than one Action Command is listed on the command line, then an error is displayed and the
utility exits.
FRUSDR Load Utility Help Screen
When the utility is invoked with the /? or /h command-line arguments, the following information
is displayed:
FRU and SDR Load Utility Version 6.2
Usage: FRUSDR
/? or /h Displays usage information.
/d {smb,fru,sdr} Only displays requested area.
/cfg filename.cfg Uses custom CFG file.
/p Pause between blocks of data.
Copyright (c) 1997-2004 Intel Corporation, All Rights Reserved