Intel SR6850HW4 - Server Platform - 0 MB RAM, Руководство по эксплуатации продукта

Страница: 182 / 272

Servicing the Processors
182 Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide
Installing a Processor Thermal Blank
If a processor and its heatsink are removed from the system, a thermal blank must be installed to
maintain proper airflow within the chassis.
To install a thermal blank:
1. Observe the safety precautions, warnings, and cautions described in “ Safety Information ”, page
5.
2. Turn off all peripheral devices connected to the server.
3. Power down the server and unplug both AC power cords.
4. Remove the top cover. For instructions, see “Removing the Top Cover”, page 144.
5. Remove the processor air baffle. For instructions, see “ Removing the Processor Air Baffle ”,
page 174.
6. Position the thermal blank on the main board as shown in Figure 93.
7. Use a long Phillips* head screwdriver to loosely engage the four screws.
8. Tighten the four screws to secure the processor thermal blank.
9. Install the processor air baffle. For instructions, see “ Installing the Processor Air Baffle ”, page
175.
10. Re-install the top cover. For instructions, see “ Installing the Top Cover ”, page 140.
TP01428
Figure 93. Installing Thermal Blank