Intel SPSH4 - Server Platform - 0 MB RAM, Технические характеристики продукции

Страница: 14 / 118

SPSH4 Server Chassis Feature Overview SPSH4 Server System External Product Specification
Revision 1.11 2
2. SPSH4 Server Chassis Feature Overview
The SPSH4 MP server Chassis is 12.22 inches wide, 18.06 inches high, and 25.25 inches
deep. The chassis is designed to be modular with a base unit with two easily removable units,
one to hold the front panel and drive bays (C-tilt) and one to hold the baseboard, processor
board and I/O panels (E-Bay). The Base section is U shaped and holds the power supplies and
power distribution board. The E-bay drops in at the rear of the base unit and the C-tilt drops in
from the front. The two captive screws in the front cover fasten both the E-bay and the C-tilt to
the base unit. The E-bay fans are plugged in to a hot-swap fan holder and installed above the
drives and infron to the E-bay. Three bays are supplied in the back of the chassis base unit for
power supplies.
Figure 1 and Figure 2 show the system front view with both rack and pedestal bezel attached.
The rack bezel has the standard color specific GE Cycoloy C6600-701 black. The pedestal
bezel comes in two colors and has the standard color specific of GE Cycoloy C6600-701 black
or GE Cycoloy C6600-BR7026 dusty beige. Only front panel status LEDs and chassis security
lock are visible without opening bezel door. Figure 3 shows the system front view with the front
bezel removed. Opening the front bezel door provides access to the following:
•
Front panel control buttons
•
One USB and one serial port
•
Three 5¼” device bays (one 5¼” CD-ROM installed)
•
One 3½” bay for a 1” floppy drive
•
Two SCSI bays holding up to ten 1” hard drives