manualshive.com logo in svg

Intel S1200BT, Руководство по обслуживанию, Страница: 73 / 122

Поделиться
Скачать
Intel S1200BT Скачать руководство пользователя страница 73

Intel® Server Board S1200BT Service Guide

57

Figure 29. Hard Disk Order Screen

CDROM Order

The CDROM Order screen allows the user to control the order in which BIOS attempts to 

boot from the CDROM drives installed in the system. This screen is only available when 

there is at least one CDROM device available in the system configuration.

Note:

A USB CDROM device will appear in this section.

To access this screen from the 

Main

 screen, select

 Boot Options

 > 

CDROM Order

. To 

move to another screen, press the 

<Esc>

 key to return to the 

Boot Options

 screen, then 

select the desired screen.

Figure 30. CDROM Order Screen

Floppy Order

The Floppy Order screen allows the user to control the order in which BIOS attempts to 

boot from the Floppy Disk drives installed in the system. This screen is only available 

when there is at least one Floppy Disk (diskette) device available in the system 

configuration.

Note:

A USB Floppy drive or a USB Key device formatted as a diskette drive will appear in this 

section.

To access this screen from the 

Main

 screen, select 

Boot Options

 > 

Floppy Order

. To 

move to another screen, press the 

<Esc>

 key to return to the 

Boot Options

 screen, then 

select the desired screen.

Содержание S1200BT



























































































































Отзывы:

Нет отзывов