Intel S1200BT Скачать руководство пользователя страница 31

Страница: 31 / 122

Intel® Server Board S1200BT Service Guide

Power Supply

A minimum of 350 W is required. Your supply must provide a minimum of 3 A of 5-V

standby current or the board will not boot.

Optional Hardware

Intel

SAS RAID Module

The Intel

Server Board S1200BTL provides a SAS Mezzanine slot (J2H1) for the

installation of an optional Intel

SAS RAID Module. Once the optional Intel

SAS Entry

RAID Module is detected, the x4 PCI Express* links from the chipset to the SAS

Mezzanine slot. Three modules are supported in this platform: AXXRMS2AF040,

AXXRMS2LL040, and AXX4SASMOD.

The optional Intel

Integrated RAID Module AXXRMS2AF040 is an intelligent custom

board-to-board PCI Express* 2.0 compliant interface RAID adapter with an integrated

LSI* LSISAS2008 Processor Chip, providing both a SAS controller and RAID engine.

With four independent ports supporting 6 Gbps and 3 Gbps SAS data transfers using four

individual SAS/SATA connectors.

The optional Intel

RAID Module AXXRMS2LL040 is an intelligent custom board-to-

board PCI Express* 2.0 compliant interface RAID adapters with an integrated LSI*

LSISAS2008 Processor Chip, providing both a SAS controller and RAID engine. With

four independent ports supporting 6-Gbps and 3 Gbps SAS data transfers using four

individual SAS/SATA connectors, The Intel

RAID Module AXXRMS2LL040 provides

reliable and fault-tolerant disk subsystem management based on the Intel

Entry

Hardware RAID (IR) Stack.

The optional Intel

SAS Entry RAID Module AXX4SASMOD provides four SAS

connectors that support up to four hard drives with a non-expander backplane or up to

eight hard drives with an expander backplane.4 ports full featured SAS/SATA hardware

RAID through optional Intel

Integrated RAID Module SROMBSASMR

(AXXROMBSASMR), provides RAID 0, 1, 5, 6 and striping capability for spans

10, 50, 60.

Содержание S1200BT



























































































































Результаты поиска

Содержание S1200BT

Отзывы:

Intel S1200BT, Руководство по обслуживанию, Страница: 31 / 122

Результаты поиска

Содержание S1200BT

Отзывы: