Intel S1200BT Скачать руководство пользователя страница 41

Страница: 41 / 122

Intel® Server Board S1200BT Service Guide

Help Text:<None>

Comments:Information only. The version information displayed is taken from the BIOS

ID String, with the timestamp segment dropped off. The segments displayed are:

Platform:Identifies whether this is a Bromolow or Romley platform BIOS
86B:Identifies this BIOS as being an EPSD Intel

Server BIOS

xx: Major Revision level of the BIOS
yy: Release Revision level for this BIOS
zzzz: Release Number for this BIOS

4. Build Date

Option Values: <Date and time when the currently installed BIOS was created (built)>

Help Text: <None>

Comments:Information only. The time and date displayed are taken from the timestamp

segment of the BIOS ID String.

5. Total Memory

Option Values: <Amount of memory installed in the system>

Help Text: <None>

Comments:Information only. Displays the total physical memory installed in the system,

in MB or GB. The term physical memory indicates the total memory discovered in the

form of installed DDR3 DIMMs.

6. Quiet Boot

Option Values:

Enabled

Disabled

Help Text:

[Enabled] – Display the logo screen during POST.

[Disabled] – Display the diagnostic screen during POST.

7. POST Error Pause

Option Values: Enabled

Disabled

Help Text:

[Enabled] – Go to the Error Manager for critical POST errors.

[Disabled] – Attempt to boot and do not go to the Error Manager for critical POST errors.

Содержание S1200BT



























































































































Результаты поиска

Содержание S1200BT

Отзывы:

Intel S1200BT, Руководство по обслуживанию, Страница: 41 / 122

Результаты поиска

Содержание S1200BT

Отзывы: