Intel S1200BT Скачать руководство пользователя страница 57

Страница: 57 / 122

Intel® Server Board S1200BT Service Guide

5. Configure AXX4SASMOD RAID Module

Option Values:

IT/IR

Intel

ESRT2 (LSI(TM))

Help Text:

— IT/IR: Provides pass-through drive support as well as HW RAID 0/1/1e support.

Uses LSI(TM) mpt drivers.

— Intel

ESRT2 (Powered by LSI(TM)): Supports RAID 0/1/10 and optional

RAID 5 with Intel

Embedded Server RAID Technology 2 (ESRT2). Uses

Intel

ESRT2 drivers (based on LSI(TM) MegaSR).

Comments:This option setting only appears when an AXX4SASMOD Storage Module is

installed. If a RAID Volume has not previously been created, it will be necessary to Save

and Exit and reboot in order to create a RAID Volume.

6. SATA Port

Option Values:

Not Installed

Help Text:

(Ports 0-1): 6Gb SATA capable port

(ports 2-5): 3Gb SATA capable port

Comments:Information only. This is repeated for all 6 SATA Port for the Onboard SATA

Controller. This section for SATA Drive Information does not appear when the SATA

Mode is RAID Mode.

Serial Port Configuration

The Serial Port Configuration screen allows the user to configure the Serial A [COM 1]

and Serial B [COM2] ports.

Содержание S1200BT



























































































































Результаты поиска

Содержание S1200BT

Отзывы:

Intel S1200BT, Руководство по обслуживанию, Страница: 57 / 122

Результаты поиска

Содержание S1200BT

Отзывы: