manualshive.com logo in svg

Intel S1200BT, Руководство по обслуживанию, Страница: 56 / 122

Поделиться
Скачать
Intel S1200BT Скачать руководство пользователя страница 56

40

Intel® Server Board S1200BT Service Guide

[Enhanced] provides Native SATA support, using native SATA drivers included with the 

vast majority of current operating systems.

[AHCI] enables the Advanced Host Controller Interface, which provides Enhanced SATA 

functionality plus additional functionality such as Native Command Queuing. Uses AHCI 

drivers available for the majority of current operating systems.

[RAID Mode] provides host based RAID support on the onboard SATA ports.

Comments:This option setting only appears when the SATA Controller is Enabled. In 

order to use the AHCI setting, any OS being booted must have AHCI drivers available. If 

the RAID Mode setting is chosen, then the following setting for RAID Mode Options will 

appear.

Note:

When the SATA Mode setting is changed, before attempting to set the Boot Order it is 

necessary to do a Save and Exit, and reboot to properly recognize any SATA hard drives.

3. RAID Mode Options

Option Values:

Intel

®

 ESRT2 (LSI(TM))

Intel

®

 RST (Matrix)

Help Text:

— Intel

®

 ESRT2 (Powered By LSI(TM)): Supports RAID 0/1/10 and optional 

RAID 5 with Intel

®

 Embedded Server RAID Technology 2 (ESRT2). Uses 

Intel

®

 ESRT2 drivers (based on LSI(TM) MegaSR).

— Intel

®

 RST (formerly known as Matrix RAID): Provides pass-through drive 

support with Intel

®

 Rapid Storage Technology(RST). Also provides host based 

RAID 0/1/10/5 support. Uses Intel

®

 RST iaStor drivers 

Comments:This option setting only appears when the SATA Controller is enabled, and 

RAID Mode has been selected as the operational SATA Mode. If a RAID Volume has not 

previously been created, it will be necessary to Save and Exit and reboot in order to create 

a RAID Volume.

4. Intel

®

 Storage Module

Option Values:

None

<Name of Storage Module detected>

Help Text:Shows the name of the Storage Module detected, if one is installed.

Comments:Information only. If no Storage module is detected, then “None” is displayed.

— This shows the customer the product name of the module installed, which helps 

in identifying drivers, support, documentation, etc by listing this on the BIOS 

screen.

When an AXX4SASMOD Storage Module is detected, then (and only then) a following 

option will be available for switching between IT/IR and ESRT2 RAID settings.

Содержание S1200BT



























































































































Отзывы:

Нет отзывов