Intel R2000LH2, Быстрая установка руководство пользователя

Страница: 14 / 20

10
General Installation Process
A
19
Install Power Supply Module
A
Insert the power supply module into the power supply cage and
push all the way until it clicks into place.
B
Repeat step A to install the second power supply.
B
A
17
Install Intel® RAID Smart Battery (optional)
A
Locate the mounting holes inside the chassis and reposition all cables routed
over the fan bulkhead. Position the battery against the side wall and through the
opening in the fan bulkhead.
B
Align the tabs on the plastic battery holder with the mounting holes in the chassis
and slide the plastic battery holder toward the front of the system until
the tabs engage with the mounting holes.
A
B
Optical
Device
Assembly
A
C
B
16
Install Add-in Card Riser Assembly
NOTE : Please make sure the release lever is in UP position before installing the
add-in card riser assembly.
A
Position the riser card connector edge over the server
board riser socket and align the riser bracket to the
plastic guides on the chassis.
Press down the release lever to
install the riser assembly into
the riser socket.
B
Push on the board edge above
the connector to ensure the
connector is seated.
C
NOTE : Please refer to the installation instructions shipped with battery for the
cable installation.
Plastic guide
Plastic guide
18
Install Top Cover
Tighten three screws.
Place system cover onto the chassis and slide forward
to engage recessed edge at front of cover.
A
B
Optical
Device
Assembl
y
B
A
A
Recessed
Edge