Intel R2000LH2, Быстрая установка руководство пользователя

Страница: 12 / 20

8
General Installation Process
13
Install Intel® RAID C600
Upgrade Key (optional)
Locate the white 4-pin key header next to Riser Slot 1. Carefully
pickup the Intel
®
RAID C600 Upgrade Key. Match the key and
connector orientation and press down to install.
STOR_UPG_KEY
I/O
Connector
B
C
I/O Module
D
A
I/O
Connector
B
C
D
A
I/O Module
12
Install Intel® I/O Expansion Module (optional)
A
D
B
Remove the screw securing the filler panel from
chassis and remove it.
Position the module over the server board, fit the
back of the module into the back panel slot.
Secure the module with the screws as shown.
C
Attach the module to the server board connector.
NOTE : If included, remember to install the EMI shield.
B
I/O Module
A
C
Install the module to the
provided bracket.
Secure the module to the
bracket with the three screws.
Install the provided
connector converter.
Fix the I/O Module to the
Bracket before installing it
at the left edge of
the Board:
A
B
C
11
Install Optical Drive
A B
IMPORTANT NOTE
: If you do
not install a device at this
location, install the optical device
bay filler panel shown below. This
is required to maintain proper
system cooling.
Rear View
of Optical
Drive
A
Install the plastic guide onto the back
of the drive and attach with two screws
as shown.
Insert the optical drive into chassis opening
and push all the way until it stops.
C
Connect the cables
as shown.
Optical
Device
Assembly
C
Data
Power
Optical
Drive
B