Datasheet
25
Electrical Specifications
NOTES:
1. The typical values shown are the VID encoded voltages. Static and ripple tolerances (for minimum and
maximum voltages) are defined in the load line tables,
through
. Adherence to loadline
specifications for the Pentium M processor is required to ensure reliable processor operation.
2. The voltage specifications are assumed to be measured at a via on the motherboard’s opposite side of the
processor’s socket (or BGA) ball with a 100-MHz bandwidth oscilloscope, 1.5-pF maximum probe
capacitance, and 1-M
Ω
minimum impedance. The maximum length of ground wire on the probe should be
less than 5 mm. Ensure external noise from the system is not coupled in the scope probe.
V
CCD738
Pentium M Processor,
Low Voltage,
738 Core VCC for
Enhanced Intel
SpeedStep Technology
Operating Points:
V
1, 2
1.4 GHz
1.116
1.3 GHz
1.116
1.2 GHz
1.100
1.1 GHz
1.068
1.0 GHz
1.052
900 GHz
1.036
800 MHz
1.020
600 MHz
0.988
Table 3-5. Voltage and Current Specifications - Low Voltage Processors (Sheet 2 of 2)
Symbol
Parameter
Min
Typ
Max
Unit
Note