Intel P4000RP, Быстрая установка руководство пользователя

Страница: 9 / 18

5
General Installation Process
A
C
D
B
E
Other
Memory
DDR3
5
Install DIMM Memory Modules
To Install DIMMs:
DDR3L DIMM Memory Ide ntification:
Open both DIMM socket levers.
C
A
D
E
Note location of alignment notch.
B
DIMM
notch and
socket
bump must
align as
shown.
This server board supports up to 4 DDR3L 1333/1600 ECC UDIMM.
Non-ECC memory is NOT supported by this server board.
CAUTION:
Observe normal ESD (ElectroStatic Discharge) procedures
to avoid possible damage to system components.
Insert DIMM making sure the connector edge of the DIMM aligns correctly with the slot.
Push down firmly on the DIMM until it snaps into place and both levers close.
IMPORTANT! Visually check that each latch is fully closed
and correctly engaged with each DIMM edge slot.
CAUTION: Avoid touching contacts when handling or installing DIMMs.
Install DIMM Memory Modules ... Continued
Intel
®
Server Board S1200V3RPL
Note:
For additional memory configurations, see the Service Guide on the
Intel
®
Server Deployment & Management DVD that accompanied
your Intel
®
Server System, or go to:
http://www.intel.com/p/en_US/support/ (post-production)
Memory sizing and configuration is supported only for qualified DIMMs approved by
Intel
®
. For a list of supported memory, go to:
http://serverconfigurator.intel.com/sct_app.aspx (post-production)
For the best performance, a minimum of two DIMMs is recommended, populated
in the blue slot of each memory channel.
DI
M
M
_A
2
DI
M
M
_A
1
DI
M
M
_B
2
DI
M
M
_B
1
CPU Socket