Intel P4000RP, Быстрая установка руководство пользователя

Страница: 11 / 18

7
General Installation Process
Server
Board
C
D
Server
Board
B
Server
Board
A
Install PCI-e Card Assembly
A
Remove the PCI slot shield by pushing the
shield out from inside the chassis.
From inside of chassis, press open the back
panel PCI add-in board retention device.
B C
While holding the PCI add-in board by its top edge or
upper corners, firmly press the add-in board into the
expansion slot.
D
Close the PCI add-in
board retention device.
8
Server
Board
RMM4
Connector
Server
Board
Latch
C
E
D
Chassis
Back
Opening
Filler
B
9
Install Intel® Remote Management Module 4 NIC (optional)
Top View
A
A
Attach the metal fastening bracket to Intel
®
Dedicated Server Management NIC module and
secure the bracket with two screws.
B
Remove the alternate RMM4 knock out by pressing the knock out from inside the chassis.
C
Connect the cable to the cable connector on the Intel
®
Dedicated Server Management NIC module.
D
Mount the NIC module to the rear panel of the chassis and secure the bracket with two screws.
E
Connect the cable to the RMM4 NIC connector to the RMM4 NIC connector on your server board.
CAUTION: Carefully remove the knock out with screwdriver, directly removing it with finger has potential risk.
CAUTION: Care should be used when attaching or removing this cable. Mishandling the cable could cause damage.