Intel P4000RP, Быстрая установка руководство пользователя

Страница: 10 / 18

6
General Installation Process
B
A
3.5" Hot-Swap Hard Drive Carrier
A
Open the Hot-swap door and
remove the drive carrier by
pressing the green button and
opening the lever.
Slide the carrier out.
B
Remove the four screws securing the
HDD interface bracket and remove the
HDD interface bracket.
C Install the hard disk drive using the same four
screws as shown. Make sure the connector
end of the drive matches the backplane
connector.
D
CAUTION: If you don’t install all drives,
empty drive bays must be occupied by
carriers with plastic drive blank
provided to maintain proper system cooling.
With the lever open, insert the
hard disk drive assembly into the
cage opening and push until the
locking lever engaged.
Push in the lever to lock it into
place, then close the door.
E
F
TOP BREAK OFF T
AB
BEFORE MOUTING
2.5´´ HARD DRIVE
C
3.5´´ HDD
D
7
Install Hard Drive
E
F
6
Install Tool-less CD-ROM or DVD-ROM Drive
C
Attach slides to the DVD or CD-ROM drive
by pressing the slides firmly into the side
dimples on the DVD or CD-ROM drive.
B
Get the slides from the
chassis side.
D
Insert the drive/slide assembly
into the device bay until the
slides lock into place.
A
Press the release latch and use
the finger holes to Pull out the
EMI shield.
Finger Holes
A
D
B
C