19
UNIX Configuration
4 Extract proinstall from the CD-ROM to your UNIX host
workstation. To do this, type on one line:
tar xvf /cdrom/npcdrom/unix/prounix.tar
/usr/intl/proinstall
5
Extract proprint and the operating system files. To do this, type
on one line:
tar xvf /cdrom/npcdrom/unix/prounix.tar
/usr/intl/
subdirectory
where
subdirectory
is one of the following:
solx86 (Solaris 2.x x86) solaris (solaris 2.x SPARC)
sco
sun (SunOS 4.1.x)
unixware
hpux
The NetportExpress print server accommodates numerous UNIX
system configurations by providing alternate ways to print. The recom-
mended print method uses
proprint, which lets you view the status of
print jobs through log files. You can also print using lpr/lpd and ftp. (FTP
printing is documented in Web NetportExpress Help.)
Installing the
proinstall software for UNIX gives you the files necessary
to use
proprint. The software also includes the UNIX readme files.
To install the software (AIX users, turn to page 27)
Note: Install the software if you’re using
proprint or want the readme
files.
1
Log in to a UNIX workstation as root.
2
Type:
ls -l /cdrom/npcdrom
to determine if the
mounting directory exists.
If necessary, create the directory by typing
mkdir -p /cdrom/npcdrom
3
Insert the CD-ROM into a UNIX workstation. If the CD-ROM
does not automatically mount, follow the directions below to
mount the CD for your system.
System
Mount Instructions (type on one line)
HP-UX
mount -t cdfs -o ro /dev/dsk/c1d1s0 /cdrom/npcdrom
SCO
mount -f ISO9660 -o ro,lower /dev/cd0 /cdrom/npcdrom
Solaris 2.x
mount -F hsfs -r /dev/dsk/c0t6d0s2 /cdrom/npcdrom
SunOS 4.1.3
mount -t hsfs -o ro /dev/sr0 /cdrom/npcdrom
UnixWare
mount -F cdfs -r /dev/cdrom/c0b0t2l0 /cdrom/npcdrom
