Intel® Server System M50CYP2UR Family System Integration and Service Guide
70
3.9
Trusted Platform Module (TPM) Installation
This section provides instructions to install a Trusted Platform Module (TPM) in the system. Refer to the
Intel® Server M50CYP Family Configuration Guide
for available options.
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver #1
Figure 80. Trusted Platform Module (TPM) Installation
1.
Power off the system and disconnect the power cable(s).
2.
Remove the system top cover (see
Section 3.1.1
3.
Remove the air duct (see
Section 3.2.1
4.
Locate the TPM module connector on the server board next to the PHM.
5.
Insert the plastic stand-off into the server board mounting hole (see Letter A).
6.
Place the TPM module over the connector and confirm the orientation of the module.
7.
Press the module down onto the connector (see Letter B).
8.
Secure the TPM module to the stand-off with the fastener screw (see Letter C).
9.
Reinstall the air duct (see
Section 3.2.2
10.
Reinstall the system top cover (see
Section 3.1.2
).
