Intel® Server System M50CYP2UR Family System Integration and Service Guide
50
3.4.1
2.5”
SSD Drive Assembly for 7 mm Drives
The Intel® Server System M50CYP2UR family supports 2.5” SSDs with 7
mm of thickness when used in
conjunction with the supplied b
lanks. The supplied blank for 2.5” bays
has two parts: top and bottom. The
top part must be attached to the 7 mm
drive to fit properly inside the 2.5” bay. This section provides
instructions to attach the supplied blank part to a 7 mm thick SSD.
Figure 46. Separating Top and Bottom Parts of Drive Blank
1.
Remove the drive blank from the system (see
Section 3.4.3
2.
Press the handles at the bottom part of the drive blank (see Letter A).
3.
Separate the top and bottom parts while pressing the handles (see Letter B).
Figure 47. Attaching the Drive Blank to 7 mm SSD
4.
Insert the 2.5” 7 mm SSD drive into the top part of the drive blank as shown in the above figure.
Caution:
To avoid damaging the SSD connector, insert the drive into the supplied blank in the direction
shown.
With the supplied blank attached to the drive,
it can be installed as a regular 2.5” SSD drive.
