Intel H2000WP, Руководство по обслуживанию

Страница: 16 / 88

Server System Features
2 Intel
®
Server System H2000WP Family Service Guide
Feature Description
Memory

Unbuffered ECC or Registered DDR3 DIMMs

Memory DDR3 data transfer rates of 800, 1066, 1333 MT/s, 1600 MT/s and 1866 MT/s (1 DPC
only)

DDR3 standard I/O voltage of 1.5V (all speed) and DDR3 Low Voltage of 1.35V (1333MT/s or
below).
Chipset on each Compute
Node
Intel
®
C600-A chipset with support for optional Storage Upgrade Keys
Compute Node
External I/O connections

DB-15 Video connectors

Two RJ-45 Network Interface for 10/100/1000 LAN

One stacked two port USB 2.0 (Port 0/1) connectors

One dedicated 1GbE management port on rIOM carrier(Optional)

One InfiniBand* QDR QSFP port (Board SKU: S2600WPQ)

One InfiniBand* FDR QSFP port (Board SKU: S2600WPF).
Compute Node Internal
I/O connectors/headers

Bridge Slot to extend board I/O
- SCU0 (Four SAS 3Gb/s ports) to backplane
- Front control panel signals
- One SATA(Port 0) 6Gb/s port for DOM

One Type-A USB 2.0 connector (USB port 2)

One 2x7pin header for system FAN module

One DH-10 serial Port A connector

One SATA 6Gb/s (Port 1)

One 2x4 pin header for Intel
®
RMM4 Lite

One 1x4 pin header for Storage Upgrade Key
Available I/O Module
Options
(Sold Separately)
The following I/O modules utilize a single proprietary on-board connector. An installed I/O
module can be supported in addition to standard on-board features and any add-in expansion
cards.

Quad Port Intel
®
I350 GbE I/O Module

Dual Port Intel
®
X540 10GbE I/O Module

Dual Port Intel
®
82599 10GbE I/O Module

QDR InfiniBand* ConnectX
®
I/O Module

FDR InfiniBand* ConnectX
®
I/O Module
System Fans by each
Compute Node

Three sets of dual rotor managed system fans

One internal power supply fan for each installed power supply unit
Compute Node Riser
Cards
S2600WPQ and S2600WPF: Four PCIe Gen III x16 riser slots

Riser slot 1 support PCIe Gen III x16 Riser with LP PCIe add-in card

Riser slot 2 supports PCIe Gen III x 16 Riser or x 8 Riser (for Intel
®
rIOM and RMM4 NIC
port)

Riser slot 3 and Riser slot 4 support PCIe Gen III x16 Risers. (Intel
®
server system H2000WP
does not provide Riser cards for slot 3 and 4 with bridge board covered)
S2600WP: Three PCIe Gen III x16 riser slots and one PCIe Gen III x(16+8) riser slots

Riser slot 1 support PCIe Gen III x16 Riser with LP PCIe add-in card

Riser slot 2 supports PCIe Gen III x 16 Riser or x 8 Riser (for Intel
®
rIOM and RMM4 NIC
port) plus an additional discrtet x8 Riser.

Riser slot 3 and Riser slot 4 support PCIe Gen III x16 Risers. (Intel
®
server system H2000WP
does not provide Riser cards for slot 3 and 4 with bridge board covered)