Hardware Installations and Updates
Intel
®
Server System H2000WP Family Service Guide
25
4.
Proceed to screw 2 and engage screw threads by giving it two rotations and stop (see letter
D
).
Similarly, engage screws 3 and 4.
5.
Repeat steps C and D by giving each screw two rotations each time until each screw is lightly
tightened up to a maximum of 8 inch-lbs torque (see letter
E
).
Figure 38. Installing Processor Heatsink
Removing the Processor
1.
Remove the processor heatsink, see Figure 31.
2.
Open the socket lever, see Figure 32.
3.
Open the load plate, see Figure 33.
4.
Remove the processor.
Installing and Removing Memory
Installing Memory
1.
Locate the DIMM sockets. Make sure the clips at either end of the DIMM socket(s) are pushed
outward to the open position (see letter
A
).
2.
Holding the DIMM by the edges, remove it from its anti-static package. Position the DIMM
above the socket. Align the notch on the bottom edge of the DIMM with the key in the DIMM
socket (see letter
B
).
3.
Insert the bottom edge of the DIMM into the socket (see letter
C
). When the DIMM is inserted,
push down on the top edge of the DIMM until the retaining clips snap into place (see letter
D
).
Make sure the clips are firmly in place (see letter
E
).
