Acceleration Stack for
Runtime
Acceleration Stack for Development
Purpose
Software development of
runtime host application
RTL development of an AFU using the Intel Quartus
®
Prime
Pro Edition and the Acceleration Stack
OPAE Software
Development Kit (SDK)
OPAE SDK version 1.1.4-3
OPAE SDK version 1.1.4-3
Intel Quartus Prime Pro
Edition
Not Included or required
Included: Intel Quartus Prime Pro Edition 18.1.2 with
related interface licenses (SR-IOV and Low Latency 10
Gbps Ethernet MAC/PHY).
2.4.2. Installing the Intel Acceleration Stack Runtime Package on the
Host Machine
Follow these instructions to extract the release package and upgrade the kernel:
1. Extract the archive file:
tar xvf *rte_installer.tar.gz
2. Change to install directory:
cd *rte_installer
3. Run
./setup.sh
and follow the prompts:
./setup.sh
4. You are prompted with the following question: Do you wish to install the OPAE:
Option
Description
Select Yes
If you have admin and network access.
Select No
If you do not have admin and network access. After the installation, follow the
manual steps listed in section Installing the OPAE Software Package.
5. Accept the license.
6. When you receive an installation directory prompt, you can specify an install
directory. Otherwise, the installer uses the default directory at
/home/
<username>/intelrtestack
.
7. Run the initialization script to set the required environment variables and
OPAE_PLATFORM_ROOT
:
source /home/<username>/intelrtestack/init_env.sh
8. Run the script
setup_fim_and_bmc.sh
to update the fpga image and board
management controller (BMC). For detailed instructions, refer to
Interface Manager (FIM) and BMC Firmware Version
The
$OPAE_PLATFORM_ROOT
is used as a relative path to executables and files
throughout the document. The following command prints the environment variable
OPAE_PLATFORM_ROOT
.
echo $OPAE_PLATFORM_ROOT
2. System Requirements and Release Installation
UG-20202 | 2019.08.05
Intel Acceleration Stack Quick Start Guide: Intel FPGA Programmable
Acceleration Card D5005
8