2. System Requirements and Release Installation
Note:
Ensure that your system meets the following requirements before you proceed to
install the Intel FPGA PAC D5005. The Intel FPGA PAC will not function properly if your
system does not meet these requirements.
Table 1.
System Requirements for the Intel FPGA PAC D5005
Hardware and Software Components
Description
Main board
PCI Express* 3.0 compliant motherboard with at least one
dual-width x16 PCIe* slot available for card installation
Server
System power supply
Auxiliary Power (12V)
(1)
Operating system
Red Hat* Enterprise Linux* (RHEL) version 7.6 Kernel
3.10.0-957
Internet connection
Required to install the OPAE driver and receive updates
2.1. Unpacking the Intel FPGA PAC
Box Contents
•
Intel FPGA PAC D5005
•
Extension mounting bracket
•
Mounting screws
Intel FPGA PAC Features
•
PCIe 2x4-pin auxiliary power connector
•
PCIe card edge connector
•
Two quad small form factor pluggable (QSFP) interfaces
•
Micro-USB
•
Card extender mounting bracket
•
Card extender mounting screws
(1)
for power cable details.
UG-20202 | 2019.08.05
Intel Corporation. All rights reserved. Agilex, Altera, Arria, Cyclone, Enpirion, Intel, the Intel logo, MAX, Nios,
Quartus and Stratix words and logos are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or
other countries. Intel warrants performance of its FPGA and semiconductor products to current specifications in
accordance with Intel's standard warranty, but reserves the right to make changes to any products and services
at any time without notice. Intel assumes no responsibility or liability arising out of the application or use of any
information, product, or service described herein except as expressly agreed to in writing by Intel. Intel
customers are advised to obtain the latest version of device specifications before relying on any published
information and before placing orders for products or services.
*Other names and brands may be claimed as the property of others.
