Intel BX80571E5300 - Pentium 2.6 GHz Processor Скачать руководство пользователя страница 99

Страница: 99 / 100

Datasheet

Debug Tools Specifications

8.1

Logic Analyzer Interface (LAI)

Intel is working with two logic analyzer vendors to provide logic analyzer interfaces

(LAIs) for use in debugging Intel Pentium

dual-core processor E5000 series systems.

Tektronix and Agilent should be contacted to get specific information about their logic

analyzer interfaces. The following information is general in nature. Specific information

must be obtained from the logic analyzer vendor.

Due to the complexity of Intel Pentium

dual-core processor E5000 series systems, the

LAI is critical in providing the ability to probe and capture FSB signals. There are two

sets of considerations to keep in mind when designing an Intel Pentium

dual-core

processor E5000 series system that can make use of an LAI: mechanical and electrical.

8.1.1

Mechanical Considerations

The LAI is installed between the processor socket and the processor. The LAI lands plug

into the processor socket, while the processor lands plug into a socket on the LAI.

Cabling that is part of the LAI egresses the system to allow an electrical connection

between the processor and a logic analyzer. The maximum volume occupied by the LAI,

known as the keepout volume, as well as the cable egress restrictions, should be

obtained from the logic analyzer vendor. System designers must make sure that the

keepout volume remains unobstructed inside the system. Note that it is possible that

the keepout volume reserved for the LAI may differ from the space normally occupied

by the processor heatsink. If this is the case, the logic analyzer vendor will provide a

cooling solution as part of the LAI.

8.1.2

Electrical Considerations

The LAI will also affect the electrical performance of the FSB; therefore, it is critical to

obtain electrical load models from each of the logic analyzers to be able to run system

level simulations to prove that their tool will work in the system. Contact the logic

analyzer vendor for electrical specifications and load models for the LAI solution it

provides.

Содержание BX80571E5300 - Pentium 2.6 GHz Processor





































































































Результаты поиска

Содержание BX80571E5300 - Pentium 2.6 GHz Processor

Отзывы:

Похожие инструкции для BX80571E5300 - Pentium 2.6 GHz Processor

Бренды по названию

Популярные бренды

Intel BX80571E5300 - Pentium 2.6 GHz Processor, Техническое описание

Результаты поиска

Содержание BX80571E5300 - Pentium 2.6 GHz Processor

Отзывы:

Похожие инструкции для BX80571E5300 - Pentium 2.6 GHz Processor

Бренды по названию

Популярные бренды