Intel BX80571E5300 - Pentium 2.6 GHz Processor, Техническое описание

Страница: 72 / 100

Land Listing and Signal Descriptions
72 Datasheet
THERMTRIP# Output
In the event of a catastrophic cooling failure, the processor will
automatically shut down when the silicon has reached a
temperature approximately 20 °C above the maximum T
C
.
Assertion of THERMTRIP# (Thermal Trip) indicates the processor
junction temperature has reached a level beyond where permanent
silicon damage may occur. Upon assertion of THERMTRIP#, the
processor will shut off its internal clocks (thus, halting program
execution) in an attempt to reduce the processor junction
temperature. To protect the processor, its core voltage (V
CC
) must
be removed following the assertion of THERMTRIP#. Driving of the
THERMTRIP# signal is enabled within 10
μ s of the assertion of
PWRGOOD (provided V
TT
and V
CC
are asserted) and is disabled on
de-assertion of PWRGOOD (if V
TT
or V
CC
are not valid, THERMTRIP#
may also be disabled). Once activated, THERMTRIP# remains
latched until PWRGOOD, V
TT
or V
CC
is de-asserted. While the de-
assertion of the PWRGOOD, V
TT
or V
CC
signal will de-assert
THERMTRIP#, if the processor’s junction temperature remains at or
above the trip level, THERMTRIP# will again be asserted within
10
μ s of the assertion of PWRGOOD (provided V
TT
and V
CC
are
valid).
TMS Input
TMS (Test Mode Select) is a JTAG specification support signal used
by debug tools.
TRDY# Input
TRDY# (Target Ready) is asserted by the target to indicate that it is
ready to receive a write or implicit writeback data transfer. TRDY#
must connect the appropriate pins/lands of all FSB agents.
TRST# Input
TRST# (Test Reset) resets the Test Access Port (TAP) logic. TRST#
must be driven low during power on Reset.
VCC Input
VCC are the power pins for the processor. The voltage supplied to
these pins is determined by the VID[7:0] pins.
VCCA Input
VCCA provides isolated power for internal PLLs on previous
generation processors. It may be left as a No-Connect on boards
supporting the processor.
VCCIOPLL Input
VCCIOPLL provides isolated power for internal processor FSB PLLs
on previous generation processors. It may be left as a No-Connect
on boards supporting the processor.
VCCPLL Input VCCPLL provides isolated power for internal processor FSB PLLs.
VCC_SENSE Output
VCC_SENSE is an isolated low impedance connection to processor
core power (V
CC
). It can be used to sense or measure voltage near
the silicon with little noise.
VCC_MB_
REGULATION
Output
This land is provided as a voltage regulator feedback sense point
for V
CC
. It is connected internally in the processor package to the
sense point land U27 as described in the Voltage Regulator Design
Guide.
Table 24. Signal Description (Sheet 9 of 10)
Name Type Description