Intel BX80571E5300 - Pentium 2.6 GHz Processor Скачать руководство пользователя страница 98 | Manualshive

Страница: 98 / 100

background image

Boxed Processor Specifications

98

Datasheet

If the boxed processor fan heatsink 4-pin connector is connected to a 4-pin

motherboard header and the motherboard is designed with a fan speed controller with

PWM output (CONTROL see

) and remote thermal diode measurement

capability the boxed processor will operate as follows:

As processor power has increased the required thermal solutions have generated

increasingly more noise. Intel has added an option to the boxed processor that allows

system integrators to have a quieter system in the most common usage.

The 4th wire PWM solution provides better control over chassis acoustics. This is

achieved by more accurate measurement of processor die temperature through the

processor's Digital Thermal Sensors (DTS) and PECI. Fan RPM is modulated through the

use of an ASIC located on the motherboard that sends out a PWM control signal to the

4th pin of the connector labeled as CONTROL. The fan speed is based on actual

processor temperature instead of internal ambient chassis temperatures.

If the new 4-pin active fan heat sink solution is connected to an older 3-pin baseboard

processor fan header, it will default back to a thermistor controlled mode, allowing

compatibility with existing 3-pin baseboard designs. Under thermistor controlled mode,

the fan RPM is automatically varied based on the Tinlet temperature measured by a

thermistor located at the fan inlet.

For more details on specific motherboard requirements for 4-wire based fan speed

control, refer to the appropriate Thermal and Mechanical Design Guidelines (see

).

§

Table 30.

Fan Heatsink Power and Signal Specifications

Boxed Processor

Fan Heatsink Set

Point (°C)

Boxed Processor Fan Speed

Notes

X

≤

30

When the internal chassis temperature is below or equal to
this set point, the fan operates at its lowest speed.
Recommended maximum internal chassis temperature for
nominal operating environment.

1

NOTES:

1. Set point variance is approximately ± 1

°

C from fan heatsink to fan heatsink.

Y = 35

When the internal chassis temperature is at this point, the fan
operates between its lowest and highest speeds.
Recommended maximum internal chassis temperature for
worst-case operating environment.

-

Z

≥

38

When the internal chassis temperature is above or equal to
this set point, the fan operates at its highest speed.

-

«
...
96
97
98
99
100
»

Содержание BX80571E5300 - Pentium 2.6 GHz Processor





































































































Отзывы:

Нет отзывов

Похожие инструкции для BX80571E5300 - Pentium 2.6 GHz Processor

ACC-CX3RDK-CU5640

Бренд: e-con Systems Страницы: 9

Бренд: FS Страницы: 19

Hollywood DV-Bridge

Бренд: Dazzle Страницы: 63

Бренд: Buffalo Страницы: 2

Бренд: IBM Страницы: 72

NVR41-4KS2 Series

Бренд: Dahua Страницы: 452

J-Link-OB-STM32F072-128KB

Бренд: Segger Страницы: 18

CHEETAH ST34501FC

Бренд: Seagate Страницы: 68

Бренд: PaloAlto Networks Страницы: 28

Modular Fast Fiber Switch Converter MT-RJ

Бренд: Lindy Страницы: 3

Бренд: IEI Technology Страницы: 146

Wisenet XRN-6410DB4

Бренд: Hanwha Techwin Страницы: 118

Бренд: protech Страницы: 84

Бренд: Cypress Semiconductor Страницы: 31

Audio Plus 3200

Бренд: Zoltrix Страницы: 34

Бренд: Magnescale Страницы: 73

Бренд: Honeywell Страницы: 74

Transistor 2SC5378

Бренд: Panasonic Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды