Intel BX80571E5300 - Pentium 2.6 GHz Processor Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 100

background image

Land Listing and Signal Descriptions

70

Datasheet

PWRGOOD

Input

PWRGOOD (Power Good) is a processor input. The processor
requires this signal to be a clean indication that the clocks and
power supplies are stable and within their specifications. ‘Clean’
implies that the signal will remain low (capable of sinking leakage
current), without glitches, from the time that the power supplies
are turned on until they come within specification. The signal must
then transition monotonically to a high state. PWRGOOD can be
driven inactive at any time, but clocks and power must again be
stable before a subsequent rising edge of PWRGOOD.
The PWRGOOD signal must be supplied to the processor; it is used
to protect internal circuits against voltage sequencing issues. It
should be driven high throughout boundary scan operation.

REQ[4:0]#

Input/

Output

REQ[4:0]# (Request Command) must connect the appropriate
pins/lands of all processor FSB agents. They are asserted by the
current bus owner to define the currently active transaction type.
These signals are source synchronous to ADSTB0#.

RESET#

Input

Asserting the RESET# signal resets the processor to a known state
and invalidates its internal caches without writing back any of their
contents. For a power-on Reset, RESET# must stay active for at
least one millisecond after V

CC

and BCLK have reached their proper

specifications. On observing active RESET#, all FSB agents will de-
assert their outputs within two clocks. RESET# must not be kept
asserted for more than 10 ms while PWRGOOD is asserted.
A number of bus signals are sampled at the active-to-inactive
transition of RESET# for power-on configuration. These
configuration options are described in the

This signal does not have on-die termination and must be
terminated on the system board.

RESERVED

All RESERVED lands must remain unconnected. Connection of these
lands to V

CC

, V

SS

, V

TT

, or to any other signal (including each other)

can result in component malfunction or incompatibility with future
processors.

RS[2:0]#

Input

RS[2:0]# (Response Status) are driven by the response agent (the
agent responsible for completion of the current transaction), and
must connect the appropriate pins/lands of all processor FSB
agents.

SKTOCC#

Output

SKTOCC# (Socket Occupied) will be pulled to ground by the
processor. System board designers may use this signal to
determine if the processor is present.

Table 24.

Signal Description (Sheet 7 of 10)

Name

Type

Description

«
...
68
69
70
71
72
...
»

Содержание BX80571E5300 - Pentium 2.6 GHz Processor





































































































Отзывы:

Нет отзывов

Похожие инструкции для BX80571E5300 - Pentium 2.6 GHz Processor

Бренд: Paradyne Страницы: 20

Compshere 3000 Series

Бренд: Paradyne Страницы: 2

Бренд: mikroElektronika Страницы: 3

EK-Vector Radeon RX5700 + XT Backplate

Бренд: ekwb Страницы: 7

Бренд: SMART Страницы: 15

Бренд: NA Страницы: 22

Бренд: Campbell Страницы: 38

zoomno MSC-5578

Бренд: BIIZZY Страницы: 2

Бренд: Unex Страницы: 27

Secure Site Manager 16

Бренд: Black Box Страницы: 16

Бренд: Dantel Страницы: 22

Бренд: ICP DAS USA Страницы: 62

Бренд: Disc Makers Страницы: 12

StudioStation 100

Бренд: Extron electronics Страницы: 131

Бренд: Fujitsu Страницы: 20

Бренд: Fujitsu Страницы: 49

Бренд: Fujitsu Страницы: 16

Бренд: Fujitsu Страницы: 121

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды