manualshive.com logo in svg

Intel Arria V, Руководство по дизайну

Поделиться
Скачать
Intel Arria V Скачать руководство пользователя страница 34

Related Information
Early Power Estimators (EPE) and Power Analyzer

4.3.2. Design Considerations for HPS and FPGA Power Supplies for SoC

FPGA devices

4.3.2.1. Consider the Need to Power Down the FPGA Portion While Keeping the

HPS Running

GUIDELINE: Use a separate programmable regulator for FPGA supply to

support powering down the FPGA while keeping the HPS running.

Cyclone V/Arria V SoC devices offer the ability to power down the FPGA while keeping

the HPS running. To do this, the FPGA V

CC

 must be sourced from a programmable

regulator that supports a control interface such as I

2

C. The Cyclone V SoC

Development Kit is an example of a development board that supports this feature. You

can find information about the Cyclone V SoC Development Kit at 

Cyclone V SoC

Development Kit and Intel SoC FPGA Embedded Development Suite

.

You can refer to the 

Cyclone V SoC Smart Configuration

 design example to understand

how to control the FPGA power supply regulator using the I

2

C connection from the

HPS.

4.3.2.2. Consider Desired HPS Boot Clock Frequency

Cyclone V / Arria V SoC devices support a HPS boot clock from 10-50 MHz in PLL

bypass mode, and up to 400MHz in PLL Locked mode. During power up or cold reset,
the boot ROM samples the value of the 

CSEL

 pins and if needed, configure the HPS

PLL to provide a faster boot clock frequency.

Refer to the table with 

CSEL

 options and corresponding external oscillator frequency in

the "Booting and Configuration" appendix of the appropriate Hard Processor System

Technical Reference Manual.

Related Information

•

"Booting and Configuration" appendix of the Cyclone V Hard Processor System

Technical Reference Manual

•

"Booting and Configuration" appendix of the Arria V Hard Processor System

Technical Reference Manual

4.3.3. Pin Connection Considerations for Board Designs

4.3.3.1. Device Power-Up

Power-Up and Power-Down Sequencing

Cyclone V/ Arria V SoC devices have the following additional power rails to consider

for power sequencing.
•

VCC_HPS

•

VCCPD_HPS

•

VCCIO_HPS

4. Board Design Guidelines for SoC FPGAs

AN-796 | 2018.06.18

AN 796: Cyclone V and Arria V SoC Device Design Guidelines

34

Содержание Arria V









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды