Intel 740 Скачать руководство пользователя страница 221

Страница: 221 / 246

Revision 0.91

SO-DIMM Module — Unbuffered SDRAM/SGRAM Graphics

1.0

Unbuffered Graphics SO-DIMM Module

1.1

General Features

•

144-pin, small-outline, dual-in-line memory module (SO-DIMM).

•

64-bit data bus (non-ECC/Parity)

•

Maximum of 8MB per module with extensions to 32MB

•

SDRAM/SGRAM

•

Single, 3.3V ±10% power supply

•

LVTTL-compatible inputs and outputs

•

Specification currently defines four module frequencies (speeds); 66 MHz (15 nS), 83 MHz
(12 nS), 100 MHz (10 nS), and 125 MHz (8 nS).

1.2

Labeling

Four module frequencies are currently defined; they are:

•

66 MHz (15 nS).

•

83 MHz (12 nS).

•

100 MHz (10 nS).

•

125 MHz (8 nS).

For consistency, modules should be clearly marked indicating their rated frequency in MHz. The
speed, in nano-seconds, is optional. This label should be consistent with the module speed setting
used in the resistor strapping option.

To be compliant, a module must meet at least one complete table in the Memory Timing section of
the “PC SGRAM” specification.

Содержание 740























































































































































































































































Результаты поиска

Содержание 740

Отзывы:

Intel 740, Руководство по конструкции, Страница: 221 / 246

Результаты поиска

Содержание 740

Отзывы: