Intel 10 Gigabit AT Ethernet Server Adapter Скачать руководство пользователя страница 89

Страница: 89 / 165

Intel® Ethernet iSCSI Boot Port Specific Setup Menu

The port specific iSCSI setup menu has four options:

Intel® iSCSI Boot Configuration

- Selecting this option will take you to the iSCSI Boot Configuration

Setup Menu. The

iSCSI Boot Configuration Menu

is described in detail in the section below and will

allow you to configure the iSCSI parameters for the selected network port.

CHAP Configuration

- Selecting this option will take you to the CHAP configuration screen. The

CHAP Configuration Menu

is described in detail in the section below.

Discard Changes and Exit

- Selecting this option will discard all changes made in the iSCSI Boot

Configuration and CHAP Configuration setup screens, and return back to the iSCSI Boot Port Selec-
tion Menu.

Save Changes and Exit

- Selecting this option will save all changes made in the iSCSI Boot Con-

figuration and CHAP Configuration setup screens. After selecting this option, you will return to the
iSCSI Boot Port Selection Menu.

Intel® iSCSI Boot Configuration Menu

The Intel® iSCSI Boot Configuration Menu allows you to configure the iSCSI Boot and Internet Protocol (IP)
parameters for a specific port. The iSCSI settings can be configured manually or retrieved dynamically from a
DHCP server.

Содержание 10 Gigabit AT Ethernet Server Adapter






































































































































































Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы:

Intel 10 Gigabit AT Ethernet Server Adapter, Руководство пользователя, Страница: 89 / 165

Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы: