Intel 10 Gigabit AT Ethernet Server Adapter Скачать руководство пользователя страница 43

Страница: 43 / 165

Node ID for each processor.

NOTES:

This setting only affects NUMA systems. It will have no effect on non-NUMA sys-
tems.

Choosing a value greater than the number of NUMA nodes present in the system
selects the NUMA node closest to the device.

Receive Side Scaling Queues

. This setting configures the number of RSS queues, which determine

the space to buffer transactions between the network adapter and CPU(s).

Default

2 queues for the Intel® 10 Gigabit Server Adapters

Range

1 queue is used when low CPU utilization is required.

2 queues are used when good throughput and low CPU utilization are required.

4 queues are used for applications that demand maximum throughput and
transactions per second.

8 and 16 queues are supported on the Intel® 82598-based and 82599-based
adapters.

NOTES:

The 8 and 16 queues are only available when PROSet for
Windows Device Manager is installed. If PROSet is not
installed, only 4 queues are available.

Using 8 or more queues will require the system to reboot.

NOTE:

Not all settings are available on all adapters.

LAN RSS and Teaming

If RSS is not enabled for all adapters in a team, RSS will be disabled for the team.

If an adapter that does not support RSS is added to a team, RSS will be disabled for the team.

If you create a multi-vendor team, you must manually verify that the RSS settings for all adapters in the
team are the same.

FCoE RSS

If FCoE is installed, FCoE RSS is enabled and applies to FCoE receive processing that is shared across
processor cores.

FCoE RSS Configuration

If your adapter supports FCoE RSS, the following configuration settings can be viewed and changed on the
base driver Advanced Performance tab:

FCoE NUMA Node Count

. This setting specifies the number of consecutive NUMA Nodes where

the allocated FCoE queues will be evenly distributed.

FCoE Starting NUMA Node

. This setting specifies the NUMA node representing the first node within

the FCoE NUMA Node Count.

Содержание 10 Gigabit AT Ethernet Server Adapter






































































































































































Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы:

Intel 10 Gigabit AT Ethernet Server Adapter, Руководство пользователя, Страница: 43 / 165

Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы: