Intel 10 Gigabit AT Ethernet Server Adapter Скачать руководство пользователя страница 131

Страница: 131 / 165

Label

Indication

Meaning

ACT/LNK

Green on

The adapter is connected to a valid link partner.

Green
flashing

Data activity

Off

No link.

10/100/

1000

Off

10 Mbps

Green

100 Mbps

Yellow

1000 Mbps

Orange
flashing

Identity. Use the "Identify Adapter" button in Intel
PROSet to control blinking. See Intel PROSet Help
for more information.

The

Intel® Ethernet Server Adapter I350-T2, I340-T2, PRO/1000 P, PT Dual Port, and Gigabit ET Dual

Port Server Adapters

have the following indicator lights:

Label

Indication

Meaning

ACT/LNK

Green on

The port is connected to a valid link partner.

Green
flashing

Data activity

Yellow
flashing

Identity. Use the "Identify Adapter" button in
Intel PROSet to control blinking. See Intel
PROSet Help for more information.

Off

No link.

10=OFF

100=GRN

1000=ORG

Orange

1000 Mbps

Green

100 Mbps

Off

10 Mbps

The

Intel® PRO/1000 MT and GT Dual Port Server Adapters

have the following indicator lights for each

port:

Содержание 10 Gigabit AT Ethernet Server Adapter






































































































































































Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы:

Intel 10 Gigabit AT Ethernet Server Adapter, Руководство пользователя, Страница: 131 / 165

Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы: