Intel 10 Gigabit AT Ethernet Server Adapter Скачать руководство пользователя страница 30

Страница: 30 / 165

Parameter

Definition

NOTE:

Even if FCOE=1 is passed, FCoE will not be installed if the operating

system and installed adapters do not support FCoE.

ISCSI

iSCSI

"0", do not install iSCSI (default). If iSCSI is already installed, it will be uninstalled.

"1", install FCoE. The iSCSI property requires DMIX=1.

IWARP_
ROUTING

iWARP routing

"0", do not install iWARP routing.

"1", install iWARP routing.

IWARP_
FIREWALL

Installs the iWARP firewall rule. For more information see

iWARP (Internet Wide Area

RDMA Protocol)

section.

"0", do not install iWARP firewall rule.

"1", install iWARP firewall rule. If "1" is selected, the following parameters are allowed
in addition to IWARP_FIREWALL.

IWARP_FIREWALL_DOMAIN [0|1] - Applies firewall rule to corporate domains.

IWARP_FIREWALL_PUBLIC [0|1] - Applies firewall rule to public networks

IWARP_FIREWALL_PRIVATE [0|1] - Applies firewall rule to private networks

FORCE

"0", check that the installed device supports a feature (FCOE, iSCSI) and only install
the feature if such a device is found.

"1", install the specified features regardless of the presence of supporting devices.

/q[r|n]

/q --- silent install options

Reduced GUI Install (only displays critical warning messages)

Silent install

/l[i|w|e|a]

/l --- log file option for PROSet installation. Following are log switches:

log status messages.

log non-fatal warnings.

log error messages.

log the start of all actions.

Содержание 10 Gigabit AT Ethernet Server Adapter






































































































































































Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы:

Intel 10 Gigabit AT Ethernet Server Adapter, Руководство пользователя, Страница: 30 / 165

Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы: