Intel 10 Gigabit AT Ethernet Server Adapter Скачать руководство пользователя страница 108

Страница: 108 / 165

Highlight the desired

Target

from the list and press

Enter

Manually fill in the

LUN

and

Boot Order

values.

Boot Order

valid values are 0-4, where 0 means no boot order or ignore the target. A 0 value

also indicates that this port should not be used to connect to the target. Boot order values of 1-4
can only be assigned once to target(s) across all FCoE boot-enabled ports.

VLAN

value is 0 by default. You may do a

Discover Targets

which will display a VLAN. If the

VLAN displayed is not the one you require, enter the VLAN manually and then perform

Discover Targets

on that VLAN.

Hit

Save

NOTE:

After the

Discover Targets

function is executed, the Option ROM will attempt to remain

logged into the fabric until the

FCoE Boot Targets Configuration Menu

is exited.

Keyboard Shortcuts: Up/Down, TAB and SHIFT-TAB to move between the controls.
Left/Right/Home/End/Del/Backspace in the edit boxes.

Press the Esc key to leave the screen.

UEFI Setup for Intel® FCoE Boot

Once you complete the configuration, it will be stored in the system's firmware memory.

Содержание 10 Gigabit AT Ethernet Server Adapter






































































































































































Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы:

Intel 10 Gigabit AT Ethernet Server Adapter, Руководство пользователя, Страница: 108 / 165

Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы: