Integral Circuits LOCOn TROLLER LT 150 A, Руководство пользователя

Страница: 8 / 36

8
PRELIMINAR
Y
D
U
D
U
Press and hold the power button for a seconds.
You will see the splash-screen before the hand-
set shows the main dashboard. The handset is
now ready to use
Turning the handset on.
Charger LED indicator codes:
Code:
Pre charge state - 1 short flash per second
Rapid Charge - led is equally on/off per sec
Post charge - led flashes short twice
No battery detected - 5 short pulses
Post charge constant voltage mode - 3
short flashes
During charging, if the battery is deeply discharged, the charger will indi -
cate it is in a “pre-charge” state in which the battery voltage is brought up to
approximately .8V per cell before commencing rapid charge.
If the batterys are at .8V per cell or above, the charger will enter rapid
charge mode in which the batteries are charged at 500mA for a maximum
time of 5 hours
Please note: The charger will not start rapid charging the bat-
teries if they are still more than 50% charged.
Turning the handset off.
To turn the handset off you have to press and hold the power button for another 2 - 3
seconds until it shows “info shutdown”
D
U
D
U
D
U
D
U
D
U
D
U
NO LOCO!
couldn’t find loco
Turn on loco power!
When the locomotive is not turned on within 10
to 15 seconds the Handset will Time-out and
show that it can’t find the locomotive.
Turn the locomotive on, and then press the
brake button once it is running. The message
will disappear and the system is ready.
No Link To locomotive.