Integral Circuits LOCOn TROLLER LT 150 A, Руководство пользователя

Страница: 18 / 36

18
PRELIMINAR
Y
Description of functions (cont):
Sets the deceleration for the Emergency stop situation. This setting allows
for a rapid deceleration without stoping the locomotive too hard.
Sets the pressure that is used in an Emergency Stop.
Sets the Dim-level of the front light
Sets the Dim-level of the rear light
*These are Factory Calibrations that we set before shipping of the unit and
usually do not ned to be changed manually*
Sets the deadband of the brake pressure sensor. Default is 1PSI
Sets the voltage offset for the pressure sensor in use. The offset voltage
can be found in the datasheet of most pressure sensors.
by default this is set to a MPX5500 pressure sensor offset voltage
Sets the scale multiplier for the current gain
Sets the voltage offset of the current sensor in use.
Sets the multiplier for the Analog to Digital converter inside the Unit
Sets the Compensation value for the internal Temperature sensors
Sets different profiles which distribute the rungs being send to the
sound module at different positions of the speed gauge. This is mainly
used to match the various different sound modules available.
Sets the amount of throttle where Rung 1 will be triggered
Sets the amount of throttle where Rung 2 will be triggered
Sets the amount of throttle where Rung 3 will be triggered
Sets the amount of throttle where Rung 4 will be triggered
Sets the amount of throttle where Rung 5 will be triggered
Sets the amount of throttle where Rung 6 will be triggered
Sets the amount of throttle where Rung 7 will be triggered
Sets the amount of throttle where Rung 8 will be triggered
Loco Setup(Cont):
EStop deceleration
EStop Brake PSI
Front light Dim
Rear Light Dim
Calibration Setup:
Brake Prsr.
deadband
Brake Prsr. offset
Current gain
Current offset
ADC Calibration
Temp Calibration
Sound Setup:
Profile
Rung 1
Rung 2
Rung 3
Rung 4
Rung 5
Rung 6
Rung 7
Rung 8