
15
RDV-1 US/Asia 29342995
Selecting the audio from connected components
Set the Source input selector to the External Input
position (Optical or Coaxial) that corresponds to the
connections made to the desired component.
If the component is connected to the DIGITAL INPUT
OPTICAL jack (DIGITAL 1), set to Optical. If the
component is connected to the DIGITAL INPUT COAXIAL
jack (DIGITAL 2), set to Coaxial.
Set the Source input selector to DVD to use the DVD
Player for disc playback, etc.
Notes
• When the Source input selector is set to either Optical or
Coaxial, only
Standby/On
on the front panel of the DVD Player
(or
ON/STNBY
on the remote controller) and DIMMER on the
remote controller can be used. All functions of the DVD Player
related to disc playback are disabled.
The audio sampling rate indicator on the front panel does not
light.
The remote control confirmation beep does not sound.
• When the position of the Source input selector is changed,
there may be a moment of silence before sound is produced.
This is not a malfunction.
• If a Dolby Digital or DTS digital signal is input during playback
of the selected source component, the signal can be
subsequently output without processing to an amp or other
component with decoding capabilities. When this is the case,
the sampling rate of the digital signal is not displayed.
• The DVD Player does not feature the ability to decode Dolby
Digital or DTS digital audio signals input from externally
connected components, and therefore no audio will not be
output from the discreet 5.1-channel ANALOG OUTPUT.
• When a linear PCM audio signal is input from a connected
component, the sampling rate is displayed.
• Please note that if the digital audio signal of a DTS CD or DTS
LD is input from a connected component, a loud noise will be
output from the ANALOG OUTPUT jacks.
When the DVD Player is in standby
mode, set the Source input selector
to the position corresponding to the
desired input.
Press Standby/On on the front
panel.
Start playback on the selected
source component.
1
2
When selecting Optical
When selecting Coaxial
Source
DVD
Optical
Coaxial
External Input
3
Sampling rate
RDV-1(US_E)p10-21.p65
10/4/00, 17:03
15