Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 45
ColorCut Pro - Setting the Sensor Offset (Cont.)
5.
From the
Media Options
click on the media size
to match the paper size
you placed in the feeder.
IF selecting A4, or US
Letter, ensure you set
LEF
(
Long Edge Fed
), or
SEF
(
Short Edge Feed
)
orientation. Then click
[OK].
6.
In the main ColorCut Pro
application screen, click
on the [SETTINGS] button.
7
.
The ColorCut
Settings
dialogue box will appear.
Here you can manually
enter the Sensor offset
Ⓐ
Ⓑ
Or automatically set it by
clicking the [
AutoFind
]
button
Ⓒ
.
(The force used by the Calibration
Pen, is manually set here
Ⓓ
, by
default for you. >200 <320g this
should not need to be changed)
7.
Click the [
AutoFind
] button, you will be asked to place
media in the cutter, and click OK, then the Intec ColorCut
LC600, will use the Pen Calibration Tool, to repeatedly
draw a spiral pattern
Ⓔ
to simulate a registration
mark. it will then move the Vision3 sensor over to find
the mark and automatically enter the values into your
Sensor Offset X and Y settings. Once completed you
will see a confirmation message.
You can now close this window, the calibration for ColorCut
Pro is now complete.
Ⓐ
Ⓑ
Ⓒ
Ⓓ
ON LINE
/OFF LINE
ENTER
Ⓔ
