Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 29
3.4 Intec ColorCut Pro (Activation)
Activating ColorCut Pro
The first time you open the ColorCut Pro
application, you will need to activate it before
you can use it.
To launch ColorCut Pro, use the Windows
[START] menu, (or press the Windows key)
and select the [ColorCut Pro] icon from the
Intec folder
B
.
Alternatively, type the first few letters of
ColorCut Pro in the search bar
C
, to
find the ColorCut Pro application.
You can PIN the ColorCut Pro
application to the START bar, or quick
launch taskbar
D
if required.
NOTE
: You can also launch from
inside Illustrator or CorelDraw,
however this requires some vector
lines on the page before you do so,
thus for the initial launch, please use
one of these methods.
Upon first launch, the ACTIVATION screen
E
will appear.
The ColorCut Pro software can
be activated automatically on-
line. Enter the Licence code
from the card supplied with
your ColorCut Pro software
and fill out your details.
The click [
ACTIVATE
]
If your computer is does not
have Internet access, you can
manually activate the software
by clicking the [MANUAL
ACTIVATION] tab in the
window.
When manually activating the
software, a challenge number
is displayed, you will need
to either email this number
to Intec Support, or call one
of the activation numbers as
shown in the dialogue box. The activation team will email back the response code, or
provide it over the telephone. Enter the response code to active your software.
B
C
D
E
