Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 17
Configuring Windows Wi-Fi HotSpot.
3
. Left click on the Wi-Fi icon
D
in the task bar
to display the ‘
Wi-Fi, Network & Internet setting
’
menu, then
Right
mouse
click
over the
Mobile
Hotspot
E
button in the lower right.
The sub menu item ‘
Go to Settings
’ will be
displayed. Click this.
4
. The ‘
Windows Mobile hotspot’
configuration menu
will be displayed. This menu
is only required when initially setting up the HotSpot. Each time you activate the
HotSpot after this, the settings for the SSID, and Password will be remembered.
The Intec LC600 is
set to make a direct
connection to a
2.4GHz WLAN with
an SSID of “H3”, and
broadcasts the Live
video feed to that
connection .
You need to set up
your HotSpot to
match this SSID
name. Click Edit
F
to configure yoru
Hotspot to 2.4GHz,
and set your SSID
and the password for
connection.
If you can’t activate the HotSpot and you
see the message show to the right, then
you skipped step 2. You must ensure
you have an internet connection to use
Windows HotSpot, even though the
cutter does not need one.
E
F
