Intab PC-Logger 3100i Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 49

Intab PC-Logger 3100i Скачать руководство пользователя страница 7

7

BASIC UNIT

2

DISPLAY AND KEYS

The LCD (Liquid Crystal Display) with adjacent keys are supplied with all
3100i:s that are equipped with internal memory.
This display and key combination is indispensable when making off-line
recordings. You indicate which function you want using the up/down arrows
and then confirm your choice with the OK-key.
The MULTIMETER is used to check transducer connections and function
before recording is started. You scroll up and down among the channels using
the up/down arrow keys. Automatic scrolling is started with the key under the
logo. A new channel is then shown every three seconds Try this feature by
pressing the ”intab°” logo.
RECORD is selected when you intend to collect data. Verify your choice with
”OK”. See illustration below.

Starting a new recording will delete the previous one.

Don’t forget to transfer data to the computer between recordings.

RECORD will also tell you ”Recording on”, if it is.

See Option: Modem Port for information on Modem Baudrate.

2.1 Clock

Logger time and date are shown in the display. They are set every time
recording parameters are supplied by the software. Correct time and date are
transferred from the computer together with off-line recording parameters.

The clock is only used by off-line recordings. Start time and sampling interval
(

∆

t

)

are used by the software to calculate data point time and date.

«
...
5
6
7
8
9
...
»

Содержание PC-Logger 3100i


















































Отзывы:

Нет отзывов