Intab PC-Logger 3100i Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 49

Intab PC-Logger 3100i Скачать руководство пользователя страница 10

10

INTAB Interface-Teknik AB

4 POWER

SUPPLY

The ”3100i” is normally powered by the supplied mains adapter.

The ”3100i” is fitted with internal rechargeable batteries. They will give the
user at least two hours of measuring time without mains supply. The batteries
are trickle-charged when the mains adapter is connected.

There is no danger of overcharging the batteries. They should be left on
charge to keep them ready to use at all times. This will also prolong the
life of the batteries

.

The internal accumulators may be disconnected from the rest of the circuitry
by removing a jumper on the analogue board.

< Jumper

Completely discharged batteries may at first take up to about 15 minutes to
charge to a point where the ”3100i” again will be operational. Two days of
charging should be enough to bring them up to full capacity.

Some applications require the ”3100i” to be powered by other sources.
Use a cable fitted with a TA3F (Switchcraft) connector to connect to, for
example, a car battery.
Don’t use sources supplying more than 15 Volts as this is the maximum
allowed.

When the mains fails or is disconnected, the ”3100i” will ”fall asleep” about
two minutes after the last command or keystroke has been entered. This
feature saves your rechargeable batteries for when they are needed.
Incoming serial (RS-232) commands or pressing the C-key will wake the
”3100i”.
Recordings will of course proceed uninterrupted. Long sampling intervals
(>10s) will allow the logger to fall asleep between samplings thus conserving
battery power.

«
...
8
9
10
11
12
...
»

Содержание PC-Logger 3100i


















































Отзывы:

Нет отзывов