Inta Nulo CB10031CP, Инструкция по установке и обслуживанию

Страница: 3 / 20

© Intatec Ltd 2017
2
Technical Data
The Nulo thermostatic shower valve is suitable for installations on all types of plumbing
systems, including gravity supplies, fully pumped, modulating combination boiler, unvented
water heater and unbalanced supplies i.e. Cold Mains & Tank Fed Hot. They are not suitable
for non-modulating combination boilers.
Max Inlet Pressure (Static) 10 bar Max Inlet Temperature 85˚C
Max Inlet Pressure (Dynamic) 5 bar Pre Set Factory Temp Setting 38˚C
Min Operating Pressure (Dynamic) 0.2 bar Temperature Stability ±2˚C
Max Unbalanced Pressure Ratio 5:1 Min Temp Differential to
Inlet Connections (Body only) G¾” ensure fail-safe between hot
Outlet Connection
Bottom G½” and cold supplies 10˚C
Item Qty Component Item Qty Component
1 1 Body 7 2 Circlip
2 2 Wall bracket 8 2 Filter
3 2 Olive 9 2 Check valve
4 2 Compression face 10 2 Connector
5 2 Concealing plate 11 2 Union nut
6 2 Sealing washer 12 2 ‘O’ ring seal
Components
11 12
2 3
5
6
7
9
10
1
4
8