INSYS MoRoS GPRS 2.1 PRO, Руководство пользователя

Страница: 85 / 144

MoRoS GPRS 2.1 PRO Functions
12.8.2 Configuring the Function of the Inputs
The MoRoS GPRS 2.1 PRO can establish a pre-configured dial-out connection, an
OpenVPN tunnel, a PPTP tunnel, an IPsec tunnel or a serial Ethernet gateway con-
nection, as soon as input 2 is closed for at least 4 seconds, i.e. connected to "GND".
When activating the input, a dial-out or tunnel or connection set-up is performed as
configured in the according menu. The connection will remain as long as the con-
nection configuration allows.
Configuration with the web interface
In order to configure the function of input 2, select in the menu "In-
/Outputs" on the page "Inputs" either the option "none", "Dial-Out auto-
matically", "Establish OpenVPN tunnel", "Establish IPsec tunnel", or "Es-
tablish outgoing serial Ethernet connection".
The respective Dial-Out or OpenVPN/IPsec functions must be configured,
to be triggered by the input.
In order to trigger a Dial-Out connection only with input 2, check the
checkbox "Exclusively (dial-on-demand is deactivated)".
In order to terminate a Dial-Out connection by opening input 2, check the
checkbox "Cancel if no longer connected with GND".
In order to trigger an OpenVPN tunnel only with input 2, check the check-
box "Establish exclusively via input (not automatically after Dial-Out)".
In order to terminate an OpenVPN tunnel by opening input 2, check the
checkbox "Cancel if no longer connected with GND".
In order to trigger a PPTP tunnel only with input 2, check the checkbox
"Establish exclusively via input (not automatically after Dial-Out)".
In order to terminate a PPTP tunnel by opening input 2, check the check-
box "Cancel if no longer connected with GND".
In order to trigger an IPsec tunnel only with input 2, check the checkbox
"Establish exclusively via input (not automatically after Dial-Out)".
In order to terminate an IPsec tunnel by opening input 2, check the
checkbox "Cancel if no longer connected with GND".
In order to terminate an outgoing serial Ethernet connection by opening
input 2, check the checkbox "Cancel if no longer connected with GND".
Save your settings by clicking "OK".
85