INSYS MoRoS GPRS 2.1 PRO, Руководство пользователя

Страница: 56 / 144

Functions MoRoS GPRS 2.1 PRO
12.4.3 Configuring a Periodical Dial-Out Connection Setup
The MoRoS GPRS 2.1 PRO can establish and terminate the previously configured
dial-out connection time-controlled. The dial-out connection is established and ter-
minated daily at a certain time.
This function will trigger individual events; no blocking time or similar is defined.
Example: If a logout is defined for 2 pm and an automatic login at 4 pm, other
events within this period could also trigger a connection setup (dial-out), e.g. a sim-
ple packet according to the dialling filter. The connection is also automatically termi-
nated after an automatic login, if the configured "Idle time" has expired, for example.
Configuration with the web interface
In order to establish a daily connection at a certain time, check in the
menu "Dial-Out" on the page "Dial-Out" the checkbox "Connect automati-
cally once a day at" and enter a time for the connection setup into the en-
try fields for hours and minutes.
In order to terminate a connection daily at a certain time, check in the
menu "Dial-Out" on the page "Dial-Out" the checkbox "Disconnect auto-
matically once a day at" and enter a time for the connection termination
into the entry fields for hours and minutes.
Save your settings by clicking "OK".
12.4.4 Routing
You can define MoRoS GPRS 2.1 PRO routes for forwarding data packets. You can
still configure NAT for incoming and outgoing packets separately.
Configuration with the web interface
In order to configure a default route, check in the menu "Dial-Out" on the
page "Port Routing" the checkbox "Set default route".
In order to enable NAT for incoming packets, check in the menu "Dial-
Out" on the page "Routing" the checkbox "Activate NAT for incoming
packets".
In order to enable NAT for outgoing packets, check in the menu "Dial-Out"
on the page "Routing" the checkbox "Activate NAT for outgoing packets".
In order to add a new route, enter in the menu "Dial-Out" on the page
"Routing" the "Net address" and the "Netmask address" into the respec-
tive fields.
In order to delete an existing route, check in the menu "Dial-Out" on the
page "Routing" under "Existing routes" the checkbox of the route(s) to be
deleted.
Save your settings by clicking "OK".
56