INSYS MoRoS GPRS 2.1 PRO, Руководство пользователя

Страница: 38 / 144

Initial Operation MoRoS GPRS 2.1 PRO
10 Initial Operation
This chapter describes how to commission the MoRoS GPRS 2.1 PRO, i.e. how to
connect the MoRoS GPRS 2.1 PRO to a PC, and how to prepare it for the configura-
tion.
Insert SIM card into the MoRoS GPRS 2.1 PRO.
How to insert the SIM card into the MoRoS GPRS 2.1 PRO.

The power supply of the MoRoS GPRS 2.1 PRO is disabled.

You will need a functionable SIM card of your mobile provider.

You will also need the according PIN.

You will need a pointed object to operate the eject button of the SIM card
holder, e.g. a screwdriver with a blade of max. 1.5 mm.
1. Press the eject button of the SIM card holder of SIM card 1 with the
pointed object.

If only one SIM card is used, this must always be inserted into the card
holder of SIM card 1!

The SIM card holder will be ejected a little bit out of the housing.
2. Remove the SIM card holder.
3. Insert your SIM card into the card holder.

The SIM card will only fit into the SIM card holder in one position.
Make sure that the SIM card does not extend over the card holder.
tacts of the SIM card must face the left housing
wall (for SIM card 1).
rted
SIM card into the housing, until the card holder snaps into place.
4. Insert the SIM card holder together with the SIM card into the MoRoS
GPRS 2.1 PRO. The con
5. Using one finger, carefully push the SIM card holder with the inse
38