INSYS MoRoS GPRS 2.1 PRO, Руководство пользователя

Страница: 112 / 144

Functions MoRoS GPRS 2.1 PRO
12.13.5 Update
You can update the MoRoS GPRS 2.1 PRO with a new firmware or provide a new
configuration using the web interface. A detailed description about these processes
can be found in the following sections "Updating the Firmware" and "Uploading the
Configuration File" of this manual.
Moreover, the MoRoS GPRS 2.1 PRO allows a daily automatic update of firmware
files, configuration files (binary and ASCII) or sandbox image files. These must be
provided on a server accordingly for this.
Note
Loss of availability!
Upon changing the configuration,it may happen that your
MoRoS GPRS 2.1 PRO cannot be accessed for a further
configuration (e.g. by changing the IP address).
Check critical settings, like IP address or access data (user
name, passwords) very carefully.
Configuration via the web interface
In order to enable the automatic update, check in the "System" menu on
the "Update" page the checkbox "Activate automatic daily update".
In order to select the file transmission protocol, select the radio button
"HTTP" or "FTP".
In order to specify the storage location of the update files, enter the IP ad-
dress or the domain name of the server into the "Server" field and the re-
spective port into the "Port" field. It is also possible to specify sub-
directories of the server that are to be searched for the files.
In order to define a fix, MAC-depending time for the daily update, select
under "Update time" the radio button "depending on MAC".
In order to define a user-defined time for the daily update, select under
"Update time" the radio button "fix" and enter the time for the update.
In order to perform the daily update directly upon WAN connection estab-
lishment, select under "Update time" the radio button "every time after
connecting to WAN".
If the file access is to be protected by an authentication, enter the respec-
tive access data into the fields "User name" and "Password".
In order to initiate the automatic update immediately, check the checkbox
"Search for updates now".
Save your settings by clicking "OK".
In order to upload a firmware or configuration file (binary or ASCII), click
in the section "Manual update" on the "Browse..." button. Then, select in
the "Upload file" window the desired image file on the respective data car-
rier and click on the "Open" button. Click on "OK" to upload the file.
112