CombiLock 200 simplex / pro / pro RFID
Handbuch V.1.10
48
INSYS locks
1.2.2
Icons
Q
Visual signal
Acoustic signal
Information on state or on background
Check required
PID
Personal identification (with versions CombiLock 200 pro / RFID:
numbers 1 to 9 for users, 0 for the master)
1.3
Intended Use
Warning
Danger of locking persons in.
Mortal danger due to possible lack of air / food.
Before closing a lock, make sure that nobody is inside the container /
room you are about to lock.
Use the high-security electronic lock system for opening and closing safes / containers
for valuables and for the administration of the opening and closing procedures only.
1.4
Danger Due to Electric Energy
Jobs which require the removal of the housing of units of the system, like described in
the Assembly Instructions, may be performed by skilled electricians only (definition see
p. 49), which have been trained and entitled to perform these jobs by INSYS
MICROELECTRONICS or approved partner companies.
Caution
Danger of short circuit of electric components.
Danger of damage to the system.
Follow the instructions on cleaning the system.
Perform jobs on hardware components like described in the
Assembly Instructions. Unauthorised retrofitting and modifications
are forbidden.
1.5
Responsibility of the Operating Company
In case the high security lock system is used in a business environment, the operating
company has to take care to follow the legal requirements concerning occupational
health and safety.
In addition to the safety warnings of this manual, also the laws and regulations
concerning safety, the prevention of accidents and the protection of the environment
have to be observed, which apply in the place where the system is operated.
