INSYS 56k Small INT 2.0, Руководство по эксплуатации

Страница: 7 / 97

INSYS Modem 56k small INT 2.0/USB 1.0 Notes Regarding the Use of the Manual
June 06 7
3 Notes Regarding the Use of the Manual
¾
This manual uses the symbol for especially important notes. Further
notes will be marked accordingly.
¾
All factory settings are marked “default”.
Example (Chap. 5.7.3): Enter old password (default: QWERTY)
¾
In Chapters 4 to 6 the description consists of two columns. Individual
functions are described on the left side. The according
AT commands and
the modem responses can be found in the right column.
Function description AT command
Example (Chap. 5.2.7):
After the hardware reset, load the user profile 1
ATZ1
¾
All AT commands start with the letters AT and end with a “Return” (Car-
riage Return - CR). AT commands can be entered in capital or small let-
ters. The command is evaluated as soon as the modem received a re-
sponse.
¾
In the following, the used syntax is explained:
c
ATDT AT
command (font: Courier, bold)
d
< Expression> Input of a parameter (font: Courier, bold)
e
< Expression> Input of an optional parameter
(Font: Courier, bold)
f Expression Response from the modem (font: italic)
Examples:
c
ATDT<n> Dialing of the phone number <n>
ATDT1234 Dialing of the phone number 1234
d + e
AT+MS=<Modulation>, [Automode]
Selection of the modulation
type
AT+MS=V92 Selection of the modulation
type V.92
AT+MS=V92,1 Selection of the modulation
typeV.92 with automatic
adjustment
f Connect The connection to the remote terminal is estab-
lished
>
Input prompt during the remote configuration.