INSYS 56k Small INT 2.0, Руководство по эксплуатации

Страница: 73 / 97

INSYS Modem 56k small INT 2.0/USB 1.0 S Registry
June 06 73
10 S Registry
S registries may be read and written using the ATS<n> command. (See Chapter 9
" AT Command Set", command ATS<n> ) Certain S registries may only be read; into
others only a particular range of values may be entered.
If the range of values is exceeded, the modem will report
OK , although the value
was not accepted. We therefore recommend to immediately check modifications
by reading (
ATS<n>? ).
Note:
*
These registries are stored in the user defaults with
AT&W0
or
AT&W1
.
10.1 Overview S Registry
Register Function Units Range Default
S0* Number of ringing tones until automatically going off-
hook Ringing
tones 0-5 5
S1 Ringing tone counter Ringing
tones 0-255 0
S2* Escape ASCII 0-255 43
S3 Return ASCII 0-127 13
S4 Linefeed character ASCII 0-127 10
S5 Backspace character ASCII 0-255 8
S6* Waiting period dial tone s 4-7 4
S7* Waiting period carrier signal s 0-100 60
S8* Dial tone delay s 1-7 2
S9* Reaction time carrier signal 0.1 s 1-255 6
S10* Time period between lost carrier signal and hang up 0.1 s 20-254 20
S12* Transmission clock of the ESC characters 0.02 s 0-255 50
S13* Number of dialing attempts to send the message 1-12 3
S14* General settings 138
S15* DTC Time Settings 1s 0-255 0*
S17* Initial character for remote configuration 0-127 42
S21* Settings for V24 116
S22* Speaker system settings 75h (117)
S24* Time period until switching into sleep mode s 0-255 0
S25 Time period for DTR signal 0.01 s 0-255 5
S26 Time period between RTS/CTS 0.01 s 0-255 1
S27* General settings - 137
S29 Time period for modifier
“
Flash
”
10 ms 17 17