background image

Scope of Delivery 

INSYS Modem 56k small INT 2.0/USB 1.0  

June 06

 

1

 

Scope of Delivery 

Before you begin with the initial operation, please check if all accessories are in-
cluded in the box. 

 

¾

 

INSYS Modem 56k small INT 2.0 or  
INSYS Modem 56k small INT USB 1.0 

¾

 

2 phone cords (TAE N at RJ12 and RJ12 at RJ12) 

¾

 

PC connection cable  
9/9-pin (RS232 cable) or USB connection cable 

¾

 

User Guide 

¾

 

CD-ROM (optional) 

 

Please contact your supplier if the content is not complete. Please also check the 
modem for shipping damage. Please also refer to your supplier if anything is dam-
aged. 
Please keep the packaging material for possible future shipping or storage.

 

2

 

Function Overview 

The INSYS Modem 56k small INT is a modem for the analogue telephone network. 
It has a very compact design and very robust plastic housing. The modem sup-
ports the following functions, which are described in detail in Chapter 5: 

 

¾

 

Usage in 87 countries 

¾

 

Establishing a data connection 

¾

 

Auto answer 

¾

 

Data flow control 

¾

 

Error correction 

¾

 

Data compression 

¾

 

Idle connection control 

¾

 

Firmware Update 

¾

 

Remote configuration 

¾

 

Security callback 

 

Содержание 56k Small INT 2.0


































































































Отзывы: